Hydrate Ridge photo mosaic
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1463_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1463_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive_Highlight_1462_med.jpg', 'title':'Dive 1462 Highlights', 'description':'Dive 1462 Highlights
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1462_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1462_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dean2-poster_med.jpg', 'title':'Dean Dr. Lisa Graumlich Video', 'description':' Dean Lisa Graumlich shares her impressions and experiences after being onboard the VISIONS'11 Leg 1 expedition.
ROPOS dive 1461 involved taking push core samples from an active methane hydrate seep at Southern Hydrate Ridge. A secondary node test frame that was deployed in 2010 and left at this site for a year to test the material properties of the frame was also recovered.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1461_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1461_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive_Highlight_1460_med.jpg', 'title':'ROPOS Dive 1460 Highlights', 'description':'The objective of dive 1460 was to recover the backbone interface assembly (BIA) from Hydrate Ridge after the L3-MariPro engineering tests were complete. The cable from the ship's A-frame was lowered to the BIA and ROPOS attached it so the BIA could be hauled in by the ship.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1460_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1460_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive1459_med.jpg', 'title':'ROPOS Dive 1459 Highlights', 'description':'The primary goal of ROPOS dive 1459 was to conduct tests on a trial OOI primary node. The primary node is made up of two major components: the backbone interface assembly (BIA) and the science interface assembly (SIA). This dive was used to test the interface between the ROV, BIA and SIA.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:dive1459.mov'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive1459+-+iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive_Highlight_1458_med.jpg', 'title':'ROPOS Dive 1458 Highlights - Instrument Recovery', 'description':'ROPOS Dive 1458 Highlights - Instrument Recovery
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1458_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1458_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive_Highlight_1457_med.jpg', 'title':'ROPOS Dive 1457 Highlights', 'description':'ROPOS dive 1457 occurred just off Gray's Harbor, WA. The objective of the dive was to recover a NSF Cascadia Array Initiative ocean bottom seismometer that had been overturned.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1457_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1457_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive-Highlight-1456_med.jpg', 'title':'ROPOS Dive 1456 Highlights', 'description':'Due to poor visibility at the BIA/SIA engineering test site, the package was recovered before all of the interface tests were conducted. These tests were then conducted at a deeper site at Southern Hydrate Ridge where visibilty was not a problem (dive 1459). The objective of dive 1456 was to attach the recovery bridle to the BIA and to attach the ship's cable from the A-frame to the bridle.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:Dive_Highlight_1456_Computer.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive_Highlight_1456_iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive-Highlight-1455_med.jpg', 'title':'ROPOS Dive 1455 Highlights', 'description':'ROPOS dive 1455 was a continuation of the L3-MariPro and ROV ROPOS interface tests. During this dive, the science interface assembly (SIA) was manuvered into the backbone interface assembly (BIA). The BIA and SIA are the two components that make up the OOI-RSN primary nodes.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:dive-highlight-1455.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive-Highlight-1455+-+iPhone.m4v/playlist.m3u8'} ]} , {'height':'540', 'width':'960', 'image':'http://io.ocean.washington.edu/files/Dive-Highlight-1454_med.jpg', 'title':'ROPOS Dive 1454 Highlights', 'description':'ROPOS dive 1454, the 2nd dive of VISIONS'11, was located just off Smith Island, WA. The goal of this dive was to conduct initial tests of a primary node designed by L3-MariPro. These tests included a series of dives to deploy, recover, and interface between ROPOS and the two components of the primary node: the backbone interface assembly (BIA) and the science interface assembly (SIA). The primary goal of dive 1454 was to recover the deployment bridle that was used to lower the BIA off of the Thompson's A-frame.
', sources: [ {'file': 'rtmp://stream.ocean.washington.edu/rsn/mp4:divehighlight1454.m4v'} ,{'file': 'http://stream.ocean.washington.edu:1935/rsnPhone/mp4:Dive+Highlight+1454+-+iPhone.m4v/playlist.m3u8'} ]} ];